Product Details:
Application | Data Transfer |
Dimension/Size | 3.5 inch |
Memory Size | 1.44 MB / 720 KB |
Temperature Range | 0 deg to 65 deg C |
Casing Material | Plastic |
Number of USB Port | 1 |
Used For | Embroidery Machine |
Tech CNC Solutions offers Floppy to USB Converter for Embroidery machine,
Additional Information:
Product Details:
Dimension/Size | 3.5 inch |
Material | Plastic |
Memory Size | 1.44 MB / 720 KB |
Application | Data Transfer |
Temperature Range | 0 deg to 65 deg C |
Relative Humidity | 5 % to 90 %,non-condensing |
No of Display Digit | 2 Digit |
Used For | CNC Wire Cut EDM Machine |
Alternative for Dos Support and Boot Floppy disk
Additional Information:
Product Details:
Model Number | FUSB 1.44G |
Usage/Application | Convertor |
Voltage | 5 V DC (voltage range 4.5 - 5.5 V DC) |
Casing Material | Plastic |
Diagnostics | Power |
Display | 2-digit,7-segment display to show current virtual floppy and diagnostics |
Frame Size | 3.5 inches |
Measurements | 100 x 25 x 122 mm ( W x H x D ) |
No of Pin | 34 Pin |
Relative Humidity | 5 % to 90 %,non-condensing |
Temperature Range | 0 deg to 65 deg C |
Replace disk drive with a USB Stick:
Additional Information:
Product Details:
Voltage | 5 V DC |
Body Material | Plastic |
No of Display Digit | 2 |
Power Source | Electric |
Temperature range | 0 deg to 65 deg C |
Model Number | FUSB-1.44F |
Display Type | Digital |
The floppy drive will soon be eliminated due to its small storage space, short lifetime and fragility along with the fast development and popularization of USB Flash drives For most industrial computerized devices which are still equipped with floppy drives as the only or main data imputing device, the most effective method to continue its life span is to convert it to a USB Flash drive reader or use network data transferring. We bring you a USB Simulating Floppy Drive which offers a solution to companies with equipment needing the floppy drive upgrade. Just Install a FUSB to replace the original floppy drive in its existing location using the systems original hardware. You will then be able to store and transfer data using a USB Flash drive or directly by network.
About the FUSB:
Product Details:
Material | Plastic |
Voltage | 5 V DC |
Application | Data Transfer |
Dimension/Size | 3.5 inch |
Relative Humidity | 5 % to 90 %, non-condensing |
Temperature Range | 0 deg to 60 deg C |
Model Number | FUSB-720F |
Used For | Charmilles Machine |
We supply a quality tested Floppy to USB Convertors. These products are highly demanded by the clients for their easy installation and durability.
Its Suitable for:
Product Details:
Operational Voltage | +5 Volts DC |
Casing | Plastic |
Frame Size | 3.5 inches |
Relative Humidity | 5 % to 90 %,non-condensing |
No of Pin | 34 |
Temperature Rrange | 0 to 65 deg C |
Power Source | Electric |
Model Number | FUSB-1.20G |
Specifications:
Jumper Setting:
Suitable for:
· HAAS CNC MACHINES,
· ABB Robot Controls-S4/S4C/S4C Puls
· DL-900 DATA LOADER
· SANGIACOMO SOCK MACHINES
· LUNATTI SOCK MACHINE
· Hurco KM3P CNC
· HITACHI H-MARIZ-10D
· KLINGELNBERG KLIN-M7
· TSK90A (In circuit tester)
· EG PROBER (EG2001, EG3001)
· Agilent Oscilloscope
· Tektronix TDS Oscilloscope
Additional Information:
Product Details:
Voltage | 4.5 - 5.5 V DC |
Casing Material | Plastic |
Frame Size | 3.5 inch |
Relative Humidity | 5 % to 90 %,non-condensing |
Temperature Range | 0 deg to 65 deg C |
Model Number | FUSB-1.44U |
Specifications:
Suitable for
Product Details:
Voltage | 4.5 - 5.5 V DC |
Casing Material | Plastic |
Frame Size | 3.5 inches |
No of Digit Display | 2 Digit |
No of Pin | 34 Pin |
Specifications:
Jumper Setting:
Suitable for:
Additional Information: